高精度直升机机载LiDAR在高速公路改扩建勘测中的应用可行性研究          下载免费PDF全文

郑伟安 《山东国土资源》2018,34(8)

机载LiDAR在公路勘测方面的用途日益广泛。该文对直升机机载LiDAR在高速公路改扩建中的应用技术路线可行性进行了研究论证,从地面控制测量、点云数据获取、点云数据处理、成果应用等多个方面进行了阐述,通过分析LiDAR点云数据在5种不同地面控制点布设方案校正下的点云数据精度,论证了利用地面控制点对直升机机载LiDAR点云数据进行平面和高程校正的可行性。  相似文献   

Metamorphic evolution of exhumed middle to lower crustal rocks in the Mojave Extensional Belt, southern California, USA     

D. J. HENRY  R. K. DOKKA 《Journal of Metamorphic Geology》1992,10(3):347-364

The Waterman Metamorphic Complex of the central Mojave Desert was exposed as a consequence of early Miocene detachment-dominated extension. However, it has evidence consistent with a more extensive geological history that involves collision of a crustal fragment(s), tectonic thickening by overthrusting and two periods of extension. The metamorphic complex contains granitoid intrusives and felsic mylonitic gneisses as well as polymetamorphic rocks that include marble, calc-silicate, quartzite. mafic granulite, pyribolite, amphibolite, migmatite and biotite schist. The latter group of rocks was affected by an initial series of high-grade metamorphic events (M1 and M2) and a localized lower grade overprint (M3). The initial metamorphism (M1) can be separated into two stages along its high-grade P–T path: M1a, a granulite facies metamorphism at 800–850° C and 7.5–9 kbar and Mlb, an upper amphibolite facies overprint at 750–800° C and 10–12 kbar. M1a developed mineral assemblages and textures consistent with granulite facies conditions at a reduced activity of H₂O and is associated with intense ductile deformation (D1) and minor local partial melting. M1b overprinted the granulite assemblages with a series of hydrous phases under conditions of increasing pressure and H₂O activity and is accompanied by little or no deformation. M2 developed at lower pressures and temperatures (650–750° C, 4.5–5.5 kbar) and is distinguished by a second local overprint of hydrous phases that reflects an input of aqueous fluids probably associated with the intrusion of a series of granitic dykes and veins. Effects of M3 are confined to the Mitchel detachment zone, an anastomosing early Miocene detachment fault, and are characterized by local ductile/brittle deformation (D2) of the pre-existing high-grade rocks and granitoid intrusives and by the production of mylonites and mylonitic gneisses under greenschist facies conditions (300–350° C, 3–5 kbar). The initial overprint (M1a) represents metamorphism, devolatilization and minor partial melting of supracrustal rocks under granulite facies conditions as a consequence of tectonic and, possibly, magmatic thickening. The increasing pressure transition of M1a to M1b reflects a period of continued compressional tectonism, thrusting and influx of H₂O, in part, locally related to crystallization of partial melts. The near isothermal decompression between M1b and M2 probably represents a pre-112-Ma extensional episode that may have been the result of a decompressional readjustment of a thickened crust. Following the initial extensional event, the metamorphic complex remained at depths of 10–17 km for at least 90 Ma until it was uplifted following Miocene extension. M3 develops locally in response to this second extensional period resulting from the early Miocene detachment faulting.  相似文献   

杭州泗岭铝质A型花岗岩的发现及其构造意义   总被引：4，自引：0，他引：4       下载免费PDF全文

卢成忠顾明光  罗以达董传万 陈国锋 《中国地质》2008,35(3):392-398

初步研究表明,以往被认为是典型的S型花岗岩或改造-重熔型花岗岩的泗岭岩体应为铝质A型花岗岩。该岩体高硅、碱、钾而明显贫钙、镁;高(K2O Na2O)/CaO值(平均16.79)和AKI指数(平均0.92);FeO*/MgO比值大(平均13.95),高于M型、S型和I型花岗岩,而与世界A型花岗岩平均值(13.4)相近;岩石为弱碱性、准铝-弱过铝质,富含稀土元素、HFSE元素,高Rb、F和Nb,反映其具A型花岗岩的成分特征。泗岭岩体氧同位素δ18O为 8‰～ 9‰,反映岩浆主要起源于下地壳。该岩体侵位于拉张的构造环境,是晚白垩世早期一次重要的构造-岩浆热事件,同时也反映了区域性孝丰—三门湾大断裂与学川—湖州大断裂在晚白垩世早期处于拉伸阶段。  相似文献   

冈底斯带东段鲁朗-墨脱地区中新世花岗岩的地球化学、年代学及成因     

耿全如  ;郑来林  ;董翰  ;孙志明  ;欧春生  ;王小伟 《中国区域地质》2008,(1):69-82

冈底斯东段的鲁朗-色季拉和墨脱-崩崩拉一带花岗岩的岩石类型主要为二长花岗岩、黑云母花岗岩、花岗闪长岩、石英闪长岩等。墨脱花岗岩的K—Ar年龄为19-22Ma;鲁朗花岗岩的^40Ar—^39Mr年龄为14-18Ma。岩石地球化学研究结果表明,本区花岗岩主要属于高钾钙碱性系列和钙碱性系列,同时具有某些埃达克岩的特征,表现为高SiO2（65．60％-76．40％）、Al2O3（12．32%-17．23％）、Sr／Y（2．41-86．46）、（La／Yb）。（6．65-56．14）比值,低Y（4．23×10^-6-39．40×10^-6）等特点。呈典型的LREE和LILE富集型分配模式．Eu为正到弱负异常。本区中新世花岗岩主要来源于中下陆壳的硅铝质成分和镁铁质成分的重熔,不同于具埃达克岩成分的冈底斯中新世含矿花岗斑岩。以中新世花岗岩侵位为标志,东喜马拉雅构造结地区的初始伸展可能在22Ma左右,早于冈底斯中段（20Ma左右）。  相似文献   

南沙西部海域伸缩型右旋走滑双重构造系统及其动力学过程   总被引：7，自引：1，他引：7  

刘海龄 《海洋地质与第四纪地质》1999,19(3):11-18

万纳断裂带为一典型的右旋走滑系统,由其南段前锋的拉奈—沙捞越走滑－收缩叠瓦扇、北段尾端的南海西南次海盆西南端走滑－伸展叠瓦扇和中段的万安盆地走滑－拉分双重构造所组成,其动力主要源自中生代末以来华南—印支陆缘岩石圈的拆沉作用和南海海底扩张,它的走滑拉分作用直接导致了万安盆地的产生,对该海域油气等资源的形成与聚集起了重要的控制作用。  相似文献   

Comparison of Strain-rate Dependent Stress-Strain Behavior from Ko-consolidated Compression and Extension Tests on Natural Hong Kong Marine Deposits     

Jian-Hua Yin  Chun-Man Cheng 《Marine Georesources & Geotechnology》2006,24(2):119-147

This article presents results from a series of K_o-consolidated compression and extension triaxial tests on specimens from undisturbed samples of Hong Kong Marine Deposits (HKMD). To investigate the strain-rate effects, a total of seven K_o-consolidated triaxial tests were conducted including four compression tests and three extension tests. After K_o-consolidation, the triaxial test specimens were sheared at step-changed axial strain rates under three different confining pressures of 50 kPa, 150 kPa, and 400 kPa, respectively. The step-changed strain rates were applied in the following order: +2%/h, +0.2%/h, +20%/h, -2%/h (unloading) and +2%/h (reloading) for the four compression tests and -2%/h, -0.2%/h, -20%/h, +2%/h (unloading) and -2%/h (reloading) for the three extension tests. The results are reported and analyzed in the paper. The results show that the strain rate effects, the stress-strain characteristics, and the effective stress paths of the specimens for tests in a compression state are different from those for tests in an extension stage. One order of magnitude increase in axial strain rate causes an average 8.6% increase in undrained shear strength for compression tests and a 12.1% increase for extension tests. It is also found that the failure mode of the specimens in compression is different from that in extension. The stress-strain behavior of specimens shows strain-softening and a clear shear band in compression tests, but strain-hardening without any clear shear band in extension tests for the same absolute value of axial strain.  相似文献   

黑潮延伸区的海平面异常和中尺度涡的统计分析   总被引：4，自引：0，他引：4  

高理  刘玉光  荣增瑞 《海洋湖沼通报》2007,58(1):14-23

利用1993～2004年卫星高度计TP/Jason-1和 ERS/ENVISAT提供的海平面异常(SLA)融合数据,分析了黑潮延伸区12年来的平均海平面异常的变化特征及中尺度涡的分布规律.研究表明,在黑潮延伸区海平面异常(SLA)呈递增趋势,年平均上升率为8.89mm/a,显著性周期是1年、0.5年和6年;黑潮延伸区的海平面异常和海表面温度异常的低频分量与Nino3指数具有较高的相关性.这说明,黑潮延伸区的海平面变化和海表面温度与厄尔尼诺事件密切相关,都受到黑潮变化的密切影响.在日本东部的黑潮延伸区,中尺度涡自东向西移动,寿命约为1年,移动速度大约是10经度/年.气旋涡和反气旋涡的面积呈现几乎同步增减的规律,均呈年周期变化,上半年少,下半年多.在1997～1998年,黑潮延伸区内中尺度涡的面积显著减小,并且正好对应于Nino3指数极大值出现的年份.因此,黑潮延伸区内中尺度涡的数量和强度也与厄尔尼诺事件密切相关.  相似文献   

基于DXF的OpenFlight数据创建方法研究     

刘立嘉  盛业华  周侗  黄云  陈旻 《测绘科学》2008,33(4)

针对虚拟城市仿真系统应用中OpenFlight模型缺乏、建模方式单一,难以构建复杂模型的情况,本文提出基于CAD文件来构建Opeflght模型的方法,在详细分析OpenFlight和DXF的数据组织结构的基础上,设计了基于DXF的OpenFlight数据创建方案并编程实现。通过实例测试证明该方案能快速、完整地进行数据转换,为虚拟城市系统的三维仿真模型构建提供了一条行之有效的途径。  相似文献   

UNB多波束数据格式解析     

王崇明  王泽民  李建虎 《测绘信息与工程》2008,33(3):13-14

采用VB进行程序设计,实现了对数据文件的解析,提取出了各种不同类型的数据,介绍了数据的处理与应用.  相似文献   

关于MAPGIS与南方CASS的数据共享技术研究     

郭瑞  杨敏华  祝汉锋 《测绘与空间地理信息》2008,31(2):94-96

多源数据格式之间的无损转换是目前不同GIS系统之间数据共享的一个重要问题。本文深入分析了MAPGIS图形格式和南方CASS标准格式的特点,通过开发独立的数据转换接口,实现了两种数据格式之间自动化和智能化转换,保证了数据的完整性和正确性,并以实例论述了数据转换实施的具体过程。  相似文献